搜索产品搜索文章

Differential Signal Transfer Module - SG400

Differential Signal Transfer Module – SG400

SG400 Accessory for Programming Melexis MLX81116/MLX81143, ELMOS E522.49/E522.94, etc.

October 28, 2023Accessories Products Signal Transistor 230

Input InterfaceDirectly plugged into the output interface of SG400
Output InterfaceDB9 interface (9-pin D-type connector)
Output SignalDB9 interface contains 4 sets of CAN interfaces
External Power Supply12V DC

Elmos Melexis SG400 Accessories

Since some chips programming interfaces use CAN PHY to transmit data (such as MLX81116, MLX81143, E522.49, E522.94, etc.), OPTEEQ SG400 is a universal programmer and requires an adapter module for signal conversion to support chips with special interfaces.

You may also be interested in these products

Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.

ELMOS Transfer Module – S4
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.
fineon’s multi-channel LED driver chip TLD7002 has a voltage range required for OTP programming of 15.5V~20V. The OTP programming voltage of the TLD7002 transfer module is designed to be 17.5V. When burning, you need to set the GPIN0 of the corres…

TLD7002 Tranfer Module – S4
fineon’s multi-channel LED driver chip TLD7002 has a voltage range required for OTP programming of 15.5V~20V. The OTP programming voltage of the TLD7002 transfer module is designed to be 17.5V. When burning, you need to set the GPIN0 of the corres…
A popular star product among engineers, it is an excellent choice for industrial mass production programming solutions. It has completely independent intellectual property rights, and its performance is comparable to similar international products…

8-Channel Universal In-system Gang-programmer OPTEEQ S8
A popular star product among engineers, it is an excellent choice for industrial mass production programming solutions. It has completely independent intellectual property rights, and its performance is comparable to similar international products…
Achieve simultaneous mass programming of different types of chips, greatly improving the production and testing efficiency of products such as car light controllers and small automotive motor controllers.

PPM/FastLIN/LIN Gang-programmer OPTEEQ T3012
Achieve simultaneous mass programming of different types of chips, greatly improving the production and testing efficiency of products such as car light controllers and small automotive motor controllers.
A popular star product among engineers, it is an excellent choice for industrial mass production programming solutions. It has completely independent intellectual property rights, and its performance is comparable to similar international products…

4-Channel Universal In-system Gang-programmer OPTEEQ S4
A popular star product among engineers, it is an excellent choice for industrial mass production programming solutions. It has completely independent intellectual property rights, and its performance is comparable to similar international products…
A universal in-system programmer with small size and great capabilities. It has been tested in the market for many years and has extremely high stability and reliability.

Universal In-System Programmer OPTEEQ S1
A universal in-system programmer with small size and great capabilities. It has been tested in the market for many years and has extremely high stability and reliability.
Some chips (such as NXP’s MC33FS8430, MC33FS8530, etc.) need to control the timing of VDDI2C, DBG, VSUP, CSB, and WAKE signals when programming, and the high-level voltage levels of each signal are different, so the OPTEEQ programmer cannot be use…

FS84xx/FS85xx Transfer Module – S4
Some chips (such as NXP’s MC33FS8430, MC33FS8530, etc.) need to control the timing of VDDI2C, DBG, VSUP, CSB, and WAKE signals when programming, and the high-level voltage levels of each signal are different, so the OPTEEQ programmer cannot be use…
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.

ELMOS Transfer Module – SG400
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.

loading…

已经是到最后一篇内容了！