搜索产品搜索文章

FS84xx/FS85xx Transfer Module - S4

FS84xx/FS85xx Transfer Module – S4

S4 Accessory for Programming NXP MC33FS8430, MC33FS8530

October 28, 2023Accessories Products Signal Transistor 377

Input InterfaceFour 14PIN (2*7MALE) terminals, corresponding to the standard wire of OPTEEQ S4
Output InterfaceFour 4PIN (2*7MALE) terminals (gray)
Output SingalIIC, VDDI2C, DBG, VSUP, CSB, WAKE and other signals
External Power Supply12V DC, recommended to choose external power supply
Power Supply from ProgrammerTurn the switch to VPP to power supply from programmer, to +12V to external power supply

NXP S4/S8 Accessories

Some chips (such as NXP’s MC33FS8430, MC33FS8530, etc.) need to control the timing of VDDI2C, DBG, VSUP, CSB, and WAKE signals when programming, and the high-level voltage levels of each signal are different, so the OPTEEQ programmer cannot be used directly. Programming requires an external transfer module.

You may also be interested in these products

Achieve simultaneous mass programming of different types of chips, greatly improving the production and testing efficiency of products such as car light controllers and small automotive motor controllers.

PPM/FastLIN/LIN Gang-programmer OPTEEQ T3016
Achieve simultaneous mass programming of different types of chips, greatly improving the production and testing efficiency of products such as car light controllers and small automotive motor controllers.
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.

ELMOS Transfer Module – SG400
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.
Inheriting the versatility and high stability of the previous generation OPTEEQ S4/S8 series, SG400 also achieves industry-leading ultra-high programming speed.

New Generation Universal Programmer OPTEEQ SG400
Inheriting the versatility and high stability of the previous generation OPTEEQ S4/S8 series, SG400 also achieves industry-leading ultra-high programming speed.
Since some chips programming interfaces use CAN PHY to transmit data (such as MLX81116, MLX81143, E522.49, E522.94, etc.), OPTEEQ SG400 is a universal programmer and requires an adapter module for signal conversion to support chips with special in…

Differential Signal Transfer Module – SG400
Since some chips programming interfaces use CAN PHY to transmit data (such as MLX81116, MLX81143, E522.49, E522.94, etc.), OPTEEQ SG400 is a universal programmer and requires an adapter module for signal conversion to support chips with special in…
fineon’s multi-channel LED driver chip TLD7002 has a voltage range required for OTP programming of 15.5V~20V. The OTP programming voltage of the TLD7002 transfer module is designed to be 17.5V. When burning, you need to set the GPIN0 of the corres…

TLD7002 Tranfer Module – S4
fineon’s multi-channel LED driver chip TLD7002 has a voltage range required for OTP programming of 15.5V~20V. The OTP programming voltage of the TLD7002 transfer module is designed to be 17.5V. When burning, you need to set the GPIN0 of the corres…
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.

ELMOS Transfer Module – S4
Some programming interfaces are single-wire JTAG (such as: E521.36, E521.39, etc.). Their electrical levels are divided into three states: high, medium and low. The universal OPTEEQ programmer requires a transfer module for conversion.
OPTEEQ Technologies has carefully launched the OPTEEQ Sensor Module, which is an industrial-grade, multi-channel sensor multi-function module/tool designed for the calibration, programming and testing needs of automotive sensor chips.

OPTEEQ Sensor Module
OPTEEQ Technologies has carefully launched the OPTEEQ Sensor Module, which is an industrial-grade, multi-channel sensor multi-function module/tool designed for the calibration, programming and testing needs of automotive sensor chips.
A universal in-system programmer with small size and great capabilities. It has been tested in the market for many years and has extremely high stability and reliability.

Universal In-System Programmer OPTEEQ S1
A universal in-system programmer with small size and great capabilities. It has been tested in the market for many years and has extremely high stability and reliability.

loading…

已经是到最后一篇内容了！